|
  |
If You would Rather Drill a Hole in Your Vase, click here.
Now it is possible to take your favorite vase and convert it into a 2 socket cluster lamp reminiscent of the 1930's. And, there is NO need to drill a hole in the vase. We have designed this kit with keyless sockets and an in-line dimmer switch. You will never have to touch the sockets to control the amount of light you want. Although both bulbs remain on, by turning the dimmer on the cord, you would have the equivalent of only one bulb on, or both, as desired. Research has shown that approximately 17" to 18" is the desired height, above the table, for the lamp's sockets. With that in mind, the kits include the proper length of threaded support pipe and 1" diameter gold powder coated tubing so that vases of different heights can come to this point above the table.
The kits include all necessary components (vase caps are sold separately) and fully illustrated instructions. If you wish to maintain the 17 to 18 inch height mentioned above, merely measure how tall your vase is. Then, from the list below choose the desired kit. Note: Our sample shown has an 8 inch tall vase with a 6 inch brass plated 1" tubing. The center picture below shows the PRE-WIRED SOCKET CLUSTER and all other parts included in each kit. Pictures on each side show partial assembly of a kit. Vase cap, rocks and vase are NOT included with each kit. Please Note: The tubing that is supplied with this kit will have a deep gold powder
coated finish. The bright brass plated polished tubing is no longer available.
Pick Your Kit by Vase Height
Vase Caps are sold separately, as there are so many sizes and styles available. Choose from: • Solid Brass (Polished/Laquered) • Unfinished Brass • Antique Brass • Nickel Plated --------- To determine the proper size vase cap to order, measure the outside diameter of the opening of the vase. Then click . . . . VASE CAPS
Call
Customer Service
800-248-1919
for other sizes.
"NSE" No Side Entry Socket & Not Pre-Wired Indicate in the box below the same quantity of vase kits ordered ONLY IF you wish to receive your kits without side-entry sockets. There is no difference in the cost per kit. But by so doing, the socket you receive with your kit will not have a side entry and will NOT be pre-wired.
GLASS & TILE DRILL BITS These bit are manufactured with C-3 tungsten carbide tips. They are ideal for drilling into glass, tile, plastics and ceramics. Precision ground tip resists wandering on startup. Always wear safety glasses/goggles when drilling with any bit!
(This is NOT 1/8 IPS)
(Used for 1/8 IPS holes)
ORDERING METHODS
Print out our Fax/Mail-In Order Form Free Fax: 888-836-1919 Call us Toll Free: 800-248-1919 sales/customer service. 
Professional Hardware's Main Page - Ordering Information - Minimum order only $15.00 Previous page Lamp Parts & Kits | e-mail us at: customer_service@profhdwr.com
